Not everybody is blessed with the intricate skills required to sew and stitch. Some people do not have the time to invest in a project such as this. Does that mean they cannot reupholster any piece of furniture? Absolutely not!
This is the ultimate guide on how to reupholster nursery glider without a lot of sewing skills. And this is especially helpful for parents with a hectic schedule.
You can DIY it within a couple of hours, and you won’t even need to hire anyone.
So take some time out to read ahead!
Why Reupholster the Nursery Glider?
There are plenty of benefits to reupholstering the nursery glider instead of opting for a brand new one.
Here is a list of reasons why you might want to consider this:
Change of Style
It is a great way to update and customize your furniture instead of using only what the market has to offer. Choose patterns and supplies that you like and think will fit in with the décor of the room.
Eco-friendly
Recycling anything is always a good initiative as it cuts down on waste and saves resources. You are saving the earth from deforestation and different types of pollution.
Cost-Effective
Needless to say, you will be getting your money’s worth if you can reupholster your old furniture.
How to Reupholster Nursery Glider?
Now select any of these three no-sew methods based on your preferences and materials available to you.
The Safety Pin Method
This is an incredibly simple and no fuss solution to reupholstering a nursery glider without any sewing activities. As a matter of fact, there are only four easy steps:
Step 1: Gather the Materials
All you will need for this process are two very large pieces of fabric of your choice and loads of safety pins.
Step 2: Replace the Cushion Fabrics
Place the new fabric over the original one and cut it a little over the length of the original cushion covers. The extra fabric will be used to secure the cushion to the glider later on.
Step 3: Add Safety Pins
Take the top and bottom cushions and wrap the newly cut fabric with it. Use safety pins to secure the fabric into the corners of the backside of each cushion. Next, stretch the fabric over the cushion and start pinning it every few inches. Add more safety pins on places where a crease forms.
Step 4: Attach the Cushions
Insert the cushions on to the glider and use the extra fabric dangling from the cushion to secure it underneath. Do this by running the safety pin through the fabric on the cushion and the small piece of cloth under the glider.
Do not worry if it does not look prim and proper because no one will look below the glider anyway. Just try to make sure the top of the glider does not have any wrinkles or gaps.
The Staple Gun Method
An alternative to using safety pins would be a staple gun. This requires less work and time. You are more likely to struggle with ensuring all the safety pins are secured adequately than if you use a staple gun.
Step 1: Buy the Staple Gun
We suggest you buy a heavy-duty staple gun and many staples because you want to avoid running out of them.
Step 2: Separate the Cushions
Now it is time to separate the cushions from the glider. Be gentle while doing this to avoid ripping the foam. You will find cardboard on your glider, which will later be used to staple the fabric into.
Step 3: Cut the Fabric
You are already familiar with this step. Cut enough fabric so you can roll some over the edges and staple it down. If you have any extra material remaining at the end, you can trim it accordingly.
Step 4: Staple the Fabric
Place the cardboard over the foam and the foam over the fabric. Pull the fabric taut over the side of both the foam and cardboard. Then staple it on to the cardboard firmly. Add staples every few inches and to cover any creases. Repeat this process for the opposite side of the cushion.
Step 5: Final Touches
Use the extra fabric in the corners to make a shape you see fit. You can do a pointy end or tidy one, whatever looks attractive to your eyes. Use more than one staple if necessary to secure it steadfastly. Repeat this process on each corner.
Attach the cushions to the glider, and you are done!
The Hot Glue Gun Method
This is also an easy method, but it does not guarantee the durability as sewing does. Regardless, here are the steps you need to follow:
Step 1: Gather the Materials
For this method, you will require enough fabric of your choice to recover the glider, fabric scissors, fabric glue, and a hot glue gun.
Step 2: Remove
Remove all the cushions, and then the cushion covers carefully. Inspect if the foam underneath is in good shape.
Step 3: Replace the Fabrics
Measure the length and width of the original fabric, then cut the new material according to one-fourth of those measurements. Now wrap the cushions with this fabric as it should be.
Step 4: Use the Hot Glue Gun
Attach the fabric to the cushion using a generous amount of glue on the hot glue gun to ensure there are no wrinkles. Press down on the pillow for a few minutes to ensure it sticks well.
Step 5: Paint the Glider
If you want, you can paint the glider while the glue dries up. This will give a completely new look to it.
Once the paint and the glue dry up, attach the cushions to the glider and use it again.
Reupholster Your Nursery Glider Today
You do not have to be an overly crafty person or give attention to details to accomplish this. This is something for people who do not have the time or energy to put in a lot of effort.
With these instructions on reupholster nursery glider, you can get rid of stains or give it a new look. You’ll see that your child and guests will appreciate this endeavor.
Related Article : What kind of fabric to use on nursery glider