How to Reweb a Lawn Chair?

Chairs are one of the furniture that has to withstand a lot of weight. And if we are talking about webbed lawn chairs, then they have to go through a lot as they mostly remain vulnerable to environmental debris, sunlight, rain, and snow. As a result, the webbing will fade or will stretch out over time.

Reweb a Lawn Chair

Now, if you have a lawn chair whose webbing is worn out and on the verge of being nonfunctional, then you might be wondering how to reweb a lawn chair or if that is possible or not.

Well, yes, re-webbing is possible, and by doing so, you will be able to save a couple of bucks that you might have spent on getting a new chair. And we are here to show you how you can reweb on your own.

Steps for Re-webbing a Lawn Chair

The process of re-webbing a lawn chair is not that much of a difficult task at all. With the right equipment and a little bit of time, you will be able to carry out the process with ease. With that said, these are the steps that you will have to follow for the re-webbing process:

Step 1: Gather Necessary Materials

First of all, you will have to get the necessary materials for starting the re-webbing process. The things that you are going to need are:

  • Screwdriver
  • Pliers
  • Scissors
  • Hammer
  • Measuring tape
  • New fasteners
  • Webbing

If the fasteners that are already on the chair is in perfect condition, you might not require any new fasteners.

Step 2: Remove the Old Webbing

After gathering all the necessary materials, you will have to remove the damaged webbing from the chair. For the removal process, you will require a screwdriver if the webbing is held in place with fasteners. However, if they are not held in place with fasteners, you will have to pry them out using a plier or screwdriver.

Step 3: Cut a New Piece of Webbing

Now that you have taken the old webbing out of the chair, you will have to cut the new one. For this, you will have to use the old webbing as a template. Lay it on a flat surface and cut the new one.

But if the old one is extremely stretched, you might have to lay the new one on top of the chair to cut the new one accordingly. Hang it over the chair and let it hang on each side of the chair at about two inches, then cut it up using a scissor.

Step 4: Weave and Fold the New Webbing

Now that you have appropriately cut the new webbing, you will have to weave it into place. Use the over and under process for making a crisscross design.

Then you will have to fold each of the corners and form a triangle shape at each of the ends. The folding process is exactly the same as the folding process that you have probably used for making airplanes.

Step 6: Finish the Setup Process

After you have folded the ends, you will have to punch a hole in each of the folded ends. Then you will have to hammer the ends into the frame of the chair, or if there are threading, you will have to use fasteners that you have unscrewed in the first step. If they are not usable, use a new set of fasteners.

Final Words

Replacing the old webbing of a lawn chair can make the chair usable again, and we hope that we were able to appropriately guide you through the how to reweb a lawn chair process.

For now, we would like to conclude here by wishing you good luck and hoping that you can convert your old, damaged lawn chair into a relatively new comfortable one.

Leave a Comment